PAINT AUXILIARY

Quick protection for painted models. Should not be applied until paint has dried completely. It is recommended to apply fine coats at approximately 30 minute intervals. Does not contain CFC. Always follow the information on the product label. DangerPressurised container: May burst if heated. Extremely flammable aerosol.

Read more less

Quick protection for painted models. Should not be applied until paint has dried completely. It is recommended to apply fine coats at approximately 30 minute intervals. Does not contain CFC. Always follow the information on the product label. DangerPressurised container: May burst if heated. Extremely flammable aerosol.

Read more less

Quick protection for painted models. Should not be applied until paint has dried completely. It is recommended to apply fine coats at approximately 30 minute intervals. Does not contain CFC. Always follow the information on the product label. DangerPressurised container: May burst if heated. Extremely flammable aerosol.

Read more less

Premium is a range of acrylic colors specifically designed for airbrushing and for optimum adherence on surfaces such as fiberglass, polyethylene, polycarbonate, metal and Lexan. Premium has been formulated with permanent pigments and a new, extremely resistant hybrid resin of acrylic-polyurethane. The Premium range contains matt and opaque, transparent, metallic, and fluorescent colors, and includes the specific varnishes and auxiliary products of the product line. Premium is especially recommended for painting motorcycle helmets, fuel tanks, surfboards and similar surfaces exposed to hard wear, and resists impacts and cracking as well as direct exposure to heat. The Premium colors resist fuel residue proof (as used in RC) ofup to at least 35% Nitro. It is recommended to apply Premium in successive layers on previously primed surfaces. A few hours after application, the Premium colors will form a homogenous film of extraordinary strength and resistance. The recommended compressor settings are around 15-20 PSI, o 0.5 to 1 kg. For a final, especially resistant protection, a final (2K) urethane varnish is recommended (applied by aerosol or airbrush). Painting tools can be cleaned with water. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro- 2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Packaging: Available in flip-top bottles of 60 ml/2.02 fl oz.

Read more less

Premium is a range of acrylic colors specifically designed for airbrushing and for optimum adherence on surfaces such as fiberglass, polyethylene, polycarbonate, metal and Lexan. Premium has been formulated with permanent pigments and a new, extremely resistant hybrid resin of acrylic-polyurethane. The Premium range contains matt and opaque, transparent, metallic, and fluorescent colors, and includes the specific varnishes and auxiliary products of the product line. Premium is especially recommended for painting motorcycle helmets, fuel tanks, surfboards and similar surfaces exposed to hard wear, and resists impacts and cracking as well as direct exposure to heat. The Premium colors resist fuel residue proof (as used in RC) ofup to at least 35% Nitro. It is recommended to apply Premium in successive layers on previously primed surfaces. A few hours after application, the Premium colors will form a homogenous film of extraordinary strength and resistance. The recommended compressor settings are around 15-20 PSI, o 0.5 to 1 kg. For a final, especially resistant protection, a final (2K) urethane varnish is recommended (applied by aerosol or airbrush). Painting tools can be cleaned with water. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro- 2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Packaging: Available in flip-top bottles of 60 ml/2.02 fl oz and 200 ml/6.76 fl oz.

Read more less

Premium is a range of acrylic colors specifically designed for airbrushing and for optimum adherence on surfaces such as fiberglass, polyethylene, polycarbonate, metal and Lexan. Premium has been formulated with permanent pigments and a new, extremely resistant hybrid resin of acrylic-polyurethane. The Premium range contains matt and opaque, transparent, metallic, and fluorescent colors, and includes the specific varnishes and auxiliary products of the product line. Premium is especially recommended for painting motorcycle helmets, fuel tanks, surfboards and similar surfaces exposed to hard wear, and resists impacts and cracking as well as direct exposure to heat. The Premium colors resist fuel residue proof (as used in RC) ofup to at least 35% Nitro. It is recommended to apply Premium in successive layers on previously primed surfaces. A few hours after application, the Premium colors will form a homogenous film of extraordinary strength and resistance. The recommended compressor settings are around 15-20 PSI, o 0.5 to 1 kg. For a final, especially resistant protection, a final (2K) urethane varnish is recommended (applied by aerosol or airbrush). Painting tools can be cleaned with water. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro- 2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Packaging: Available in flip-top bottles of 60 ml/2.02 fl oz and 200 ml/6.76 fl oz.

Read more less

Premium is a range of acrylic colors specifically designed for airbrushing and for optimum adherence on surfaces such as fiberglass, polyethylene, polycarbonate, metal and Lexan. Premium has been formulated with permanent pigments and a new, extremely resistant hybrid resin of acrylic-polyurethane. The Premium range contains matt and opaque, transparent, metallic, and fluorescent colors, and includes the specific varnishes and auxiliary products of the product line. Premium is especially recommended for painting motorcycle helmets, fuel tanks, surfboards and similar surfaces exposed to hard wear, and resists impacts and cracking as well as direct exposure to heat. The Premium colors resist fuel residue proof (as used in RC) ofup to at least 35% Nitro. It is recommended to apply Premium in successive layers on previously primed surfaces. A few hours after application, the Premium colors will form a homogenous film of extraordinary strength and resistance. The recommended compressor settings are around 15-20 PSI, o 0.5 to 1 kg. For a final, especially resistant protection, a final (2K) urethane varnish is recommended (applied by aerosol or airbrush). Painting tools can be cleaned with water. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro- 2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Packaging: Available in flip-top bottles of 60 ml/2.02 fl oz.

Read more less

Premium is a range of acrylic colors specifically designed for airbrushing and for optimum adherence on surfaces such as fiberglass, polyethylene, polycarbonate, metal and Lexan. Premium has been formulated with permanent pigments and a new, extremely resistant hybrid resin of acrylic-polyurethane. The Premium range contains matt and opaque, transparent, metallic, and fluorescent colors, and includes the specific varnishes and auxiliary products of the product line. Premium is especially recommended for painting motorcycle helmets, fuel tanks, surfboards and similar surfaces exposed to hard wear, and resists impacts and cracking as well as direct exposure to heat. The Premium colors resist fuel residue proof (as used in RC) ofup to at least 35% Nitro. It is recommended to apply Premium in successive layers on previously primed surfaces. A few hours after application, the Premium colors will form a homogenous film of extraordinary strength and resistance. The recommended compressor settings are around 15-20 PSI, o 0.5 to 1 kg. For a final, especially resistant protection, a final (2K) urethane varnish is recommended (applied by aerosol or airbrush). Painting tools can be cleaned with water. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro- 2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Packaging: Available in flip-top bottles of 60 ml/2.02 fl oz and 200 ml/6.76 fl oz.

Read more less

Premium is a range of acrylic colors specifically designed for airbrushing and for optimum adherence on surfaces such as fiberglass, polyethylene, polycarbonate, metal and Lexan. Premium has been formulated with permanent pigments and a new, extremely resistant hybrid resin of acrylic-polyurethane. The Premium range contains matt and opaque, transparent, metallic, and fluorescent colors, and includes the specific varnishes and auxiliary products of the product line. Premium is especially recommended for painting motorcycle helmets, fuel tanks, surfboards and similar surfaces exposed to hard wear, and resists impacts and cracking as well as direct exposure to heat. The Premium colors resist fuel residue proof (as used in RC) ofup to at least 35% Nitro. It is recommended to apply Premium in successive layers on previously primed surfaces. A few hours after application, the Premium colors will form a homogenous film of extraordinary strength and resistance. The recommended compressor settings are around 15-20 PSI, o 0.5 to 1 kg. For a final, especially resistant protection, a final (2K) urethane varnish is recommended (applied by aerosol or airbrush). Painting tools can be cleaned with water. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro- 2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Packaging: Available in flip-top bottles of 60 ml/2.02 fl oz and 200 ml/6.76 fl oz.

Read more less

Premium is a range of acrylic colors specifically designed for airbrushing and for optimum adherence on surfaces such as fiberglass, polyethylene, polycarbonate, metal and Lexan. Premium has been formulated with permanent pigments and a new, extremely resistant hybrid resin of acrylic-polyurethane. The Premium range contains matt and opaque, transparent, metallic, and fluorescent colors, and includes the specific varnishes and auxiliary products of the product line. Premium is especially recommended for painting motorcycle helmets, fuel tanks, surfboards and similar surfaces exposed to hard wear, and resists impacts and cracking as well as direct exposure to heat. The Premium colors resist fuel residue proof (as used in RC) ofup to at least 35% Nitro. It is recommended to apply Premium in successive layers on previously primed surfaces. A few hours after application, the Premium colors will form a homogenous film of extraordinary strength and resistance. The recommended compressor settings are around 15-20 PSI, o 0.5 to 1 kg. For a final, especially resistant protection, a final (2K) urethane varnish is recommended (applied by aerosol or airbrush). Painting tools can be cleaned with water. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro- 2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Packaging: Available in flip-top bottles of 60 ml/2.02 fl oz and 200 ml/6.76 fl oz.

Read more less

Premium is a range of acrylic colors specifically designed for airbrushing and for optimum adherence on surfaces such as fiberglass, polyethylene, polycarbonate, metal and Lexan. Premium has been formulated with permanent pigments and a new, extremely resistant hybrid resin of acrylic-polyurethane. The Premium range contains matt and opaque, transparent, metallic, and fluorescent colors, and includes the specific varnishes and auxiliary products of the product line. Premium is especially recommended for painting motorcycle helmets, fuel tanks, surfboards and similar surfaces exposed to hard wear, and resists impacts and cracking as well as direct exposure to heat. The Premium colors resist fuel residue proof (as used in RC) ofup to at least 35% Nitro. It is recommended to apply Premium in successive layers on previously primed surfaces. A few hours after application, the Premium colors will form a homogenous film of extraordinary strength and resistance. The recommended compressor settings are around 15-20 PSI, o 0.5 to 1 kg. For a final, especially resistant protection, a final (2K) urethane varnish is recommended (applied by aerosol or airbrush). Painting tools can be cleaned with water. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro- 2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Packaging: Available in flip-top bottles of 60 ml/2.02 fl oz and 200 ml/6.76 fl oz.

Read more less

For sable and synthetic brushes. Submerge brush in the container for a few minutes, remove and allow to dry: the fibers of the brush will have recovered their original shape.

Read more less

Cleaner for brushes which have been used with alcohol based paints (Liquid Gold, Supergold) and brushes which simply need a more thorough cleaning. Will not damage even the finest Kolinsky Sable brushes. Always follow the information on the product label. DangerFlammable liquid and vapour. Contains: alcohol, water and alcohol ethoxylate.

Read more less

Pigment fixer, mixed with pigment allows to depict accumulated mud and other effects on models and dioramas. Slow drying, thus facilitating its application, the creation blending effects, or its own manipulation. Satin finish. Safety: Always follow the information on the product label. 

Read more less

Crackle Medium is a water based medium, used between two coats of paint to create a weathered effect, or as a final coat to create a transparent crackled surface. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Permanent and very resistant varnish. Dries to touch in one hour. For application of two coats of varnish, we recommend an interval of 24 hours. Can be used directly with brush or airbrush of needle size 0.4 mm without dilution. Clean up with soap and water. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Permanent and very resistant varnish. Dries to touch in one hour. For application of two coats of varnish, we recommend an interval of 24 hours. Can be used directly with brush or airbrush of needle size 0.4 mm without dilution. Clean up with soap and water. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Permanent and very resistant varnish. Dries to touch in one hour. For application of two coats of varnish, we recommend an interval of 24 hours. Can be used directly with brush or airbrush of needle size 0.4 mm without dilution. Clean up with soap and water. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Permanent and very resistant varnish. Dries to touch in one hour. For application of two coats of varnish, we recommend an interval of 24 hours. Can be used directly with brush or airbrush of needle size 0.4 mm without dilution. Clean up with soap and water. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

New formula acrylic colors with a satin finish, extra resistant and impact proof especially designed for airbrushing surfaces exposed to aggressive manipulation. The advanced formulation contains a revolutionary component which guarantees exceptional adherence on even the most difficult surfaces, and offers great resistance to rough handling, impact, friction, scratches, etc. Once dry, the Mecha surface looks the same as the original plastic of the model, while yet the smallest details of the original remain clearly visible. The color range includes primers as well as special varnishes – also with an exclusive formulation- and a series of colors for aging and weathering effects. It is recommended to apply the Mecha colors in several layers on the previously primed surface; a few hours after application the colors will have dried to form a homogenous coating of extraordinary strength and resistance. Mecha Color can be airbrushed directly or diluted with Vallejo Airbrush Thinner or Flow Improver, and the colors can also be applied by brush. The compressor adjustment recommended is 15 – 20 PSI o 0.5 to 1 kg. For best airbrush maintenance we recommend using the Vallejo Airbrush Cleaner. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro- 2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Packaging: Mecha Color is available in 18 ml/0.6 fl oz bottles (with eyedropper). Mecha Primer and Mecha Varnish are also available in 60 ml/2.02 fl oz and 200 ml/6.76 fl oz bottles (with flip top and eyedropper). About this product: Matt varnish; Can be airbrushed or diluted with an airbrush thinner; Great resistance to impacts and scratches 24 h after application; Fast drying; Can be mixed with other products; Is water-based; Is not flammable.

Read more less

New formula acrylic colors with a satin finish, extra resistant and impact proof especially designed for airbrushing surfaces exposed to aggressive manipulation. The advanced formulation contains a revolutionary component which guarantees exceptional adherence on even the most difficult surfaces, and offers great resistance to rough handling, impact, friction, scratches, etc. Once dry, the Mecha surface looks the same as the original plastic of the model, while yet the smallest details of the original remain clearly visible. The color range includes primers as well as special varnishes – also with an exclusive formulation- and a series of colors for aging and weathering effects. It is recommended to apply the Mecha colors in several layers on the previously primed surface; a few hours after application the colors will have dried to form a homogenous coating of extraordinary strength and resistance. Mecha Color can be airbrushed directly or diluted with Vallejo Airbrush Thinner or Flow Improver, and the colors can also be applied by brush. The compressor adjustment recommended is 15 – 20 PSI o 0.5 to 1 kg. For best airbrush maintenance we recommend using the Vallejo Airbrush Cleaner. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro- 2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Packaging: Mecha Color is available in 18 ml/0.6 fl oz bottles (with eyedropper). Mecha Primer and Mecha Varnish are also available in 60 ml/2.02 fl oz and 200 ml/6.76 fl oz bottles (with flip top and eyedropper). About this product: Matt varnish Can be airbrushed or diluted with an airbrush thinner Great resistance to impacts and scratches 24 h after application Fast drying Can be mixed with other products Is water-based Is not flammable

Read more less

New formula acrylic colors with a satin finish, extra resistant and impact proof especially designed for airbrushing surfaces exposed to aggressive manipulation. The advanced formulation contains a revolutionary component which guarantees exceptional adherence on even the most difficult surfaces, and offers great resistance to rough handling, impact, friction, scratches, etc. Once dry, the Mecha surface looks the same as the original plastic of the model, while yet the smallest details of the original remain clearly visible. The color range includes primers as well as special varnishes – also with an exclusive formulation- and a series of colors for aging and weathering effects. It is recommended to apply the Mecha colors in several layers on the previously primed surface; a few hours after application the colors will have dried to form a homogenous coating of extraordinary strength and resistance. Mecha Color can be airbrushed directly or diluted with Vallejo Airbrush Thinner or Flow Improver, and the colors can also be applied by brush. The compressor adjustment recommended is 15 – 20 PSI o 0.5 to 1 kg. For best airbrush maintenance we recommend using the Vallejo Airbrush Cleaner. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro- 2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Packaging: Mecha Color is available in 18 ml/0.6 fl oz bottles (with eyedropper). Mecha Primer and Mecha Varnish are also available in 60 ml/2.02 fl oz and 200 ml/6.76 fl oz bottles (with flip top and eyedropper). About this product: Gloss varnish Can be airbrushed or diluted with an airbrush thinner Great resistance to impacts and scratches 24 h after application Fast drying Can be mixed with other products Is water-based Is not flammable

Read more less

Removes paint and lubricates the mechanism of the airbrush without causing damage. For more thorough cleaning, soak valve and nozzle (not the whole airbrush) for several hours.

Read more less

Improves the flow and delays the drying of the paint. It is recommended to add three drops of Improver for every ten drops of paint.

Read more less

Dilutes color without loss of adhesion, resistance and consistency. Airbrush colors: dilute by adding a maximum of 25% of Thinner. Brush on colors: dilute by adding a maximum of 50% of Thinner.

Read more less

Water based medium to create flaked paint, scratches, and rust chips. Can be applied with airbrush or brush to create chipping effects with acrylic colors. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Cleans and prepares the model surface before placing decals and wet transfers, improves adherence of the decal, and prevents formation of air bubbles without need for a previous coat of varnish. Apply Decal Fix with a soft brush on model surface, gently slide decal from its paper support and with a wet brush tip place decal on the model, pressing down lightly with the brush to eliminate excess liquid and avoid air bubbles. Remember the result depends on the quality of the brand of decals. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Protects and smoothes the decal so that it blends with the surface of the model. It also softens the decal to adapt it to surface details such as recessed lines, raised edges, screws or bolts. The amount of coats needed depends on the quality and thickness of the decal. Final varnish can be applied to the Decal if desired. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Mixed with acrylic colors to a maximum of 10%. Retarder increases their open (drying) time. Useful for blending and shading or wet- in wet techniques and reducing skin-formation on the palette.

Read more less

Glaze Medium is a colorless glaze, used to mix with acrylic colors; improves fluidity, increases transparency, and slows drying time. Ideal for shadows, shadings, glazes and working with pigments.

Read more less

When mixed with high-density paints like Model Color or Game Color, it enhances their matte finish. It does not alter viscosity, tones, or drying response, preserving fluidity and chromatic value. Especially suitable for effects and textures that require such a finish, particularly on figures. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Dilutes color without loss of adhesion, resistance and consistency. Increases flow and transparency of colors. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Liquid Mask is used to reserve areas which are to remain unpainted, especially in airbrush techniques. The product forms a protective film on the area which the artists does not want to paint. Once the work is dry, liquid mask is rubbed off revealing the unpainted area. Use with brush. Shake lightly and test on surface before use. Do not leave applied for a long time. To remove, peel or rub carefully once dry. Keep from freezing. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Water based acrylic varnish with a quick drying formula, and an acrylic resin of extraordinary hardness and permanence. Protects painted models from dust and scratches, dirt and humidity. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Metal Medium is an acrylic medium formulated with mica, can be mixed with acrylic colors to create an iridescent lustre or applied by itself for a silvery iridescent effect. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Water based acrylic varnish with a quick drying formula, and an acrylic resin of extraordinary hardness and permanence. Protects painted models from dust and scratches, dirt and humidity. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Water based acrylic varnish with a quick drying formula, and an acrylic resin of extraordinary hardness and permanence. Protects painted models from dust and scratches, dirt and humidity. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Reduces consistency and increases gloss, flow and transparency. Dries quickly, flexible and waterproof. Keep painting tools moist and clean with water. Do not use as final varnish. Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less

Light and fluid putty with a water-based formula, ideal to fix fit defects or gaps on scale models of vehicles and figures. It can be applied with a brush, spatula or using the dispenser in the available format. Dries with a matt white finish. The applications can be primed or painted without any problem. It can be diluted to represent textures on surfaces (casting in armor, rust, etc.). Safety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1). May cause allergic reactions.

Read more less